The authors investigated the dead fragments of 22 species of submerged plants in the water from three limnological and trophical different water bodies (spring, river and pond). A total of 184 species of aquatic fungi, including 119 zoosporic and 65 conidial species were found on the fragments investigated plants. The most common fungus species were Aphanomyces laevis, Saprolegnia litoralis, Pythium rostratum (zoosporic fungi) and Acrodictys elaeidicola, Anguillospora longissima, Angulospora aquatica, Lemonniera aquatica, Mirandina corticola, Tetracladium marchalianum, Tetracladium maxiliformis, Trinacrium subtile (conidial fungi).
Most fungus species were observed on the specimens of Elodea canadensis (33 fungus species), Hippuris vulgaris f. submersa (33), Myriophyllum spicatum (34) and Potamogeton crispus (33), fewest on Ceratophyllum demersum (24), Fontinalis dalicarlica and Potamogeton nitens (each 25).
The most fungi were growing in the water from River Supraśl (107), the fewest in the water from Pond Dojlidy (99). Some aquatic fungus species were observed in the water of only one of the three water bodies – in Pond Dojlidy (30), in Spring Jaroszówka (32) and in the River Supraśl (39) species. Seventy-five species growing only on fragments of single submerged plants. A number of zoosporic and conidial species (22 and four, respectively) appeared new to Polish waters. Out of these 119 zoosporic species, some are known as parasites or necrotrophs of fish. 相似文献
The identification of marine source rocks in the Tarim Basin is debated vigorously. The intention of this paper is to investigate the asphahenes in heavy oils from the Lunnan and Tabe oilfields and Well TD2 with ruthenium-ions-catalyzed oxidation technique (RICO), in order to explore its role in oil-oil and oil-source correlations, The RICO products included n-alkanoic acids, α,ω-di-n-alkanoic acids, branched alkanoic acids, tricyclic terpanoic acids, hopanoic acids, gammacerane carboxylic acid , regular sterane carboxylic acids and 4-methylsterane carboxylic acids. The n-alkyl chains and biomarkers bounded on the asphaltenes were of unsusceptibility to biodegradation. The distribution and absolute concentrations of n-alkanoic acids in the RICO products of heavy oils from the Lunnan and Tabe oilfields are different from those of Well TD2. The biomarkers bounded on the asphahenes, especially steranes, have a distribution trend similar to that of the counterparts in saturates. The sterane carboxylic acids and 4-methylsterane carboxylic acids in the RICO products of heavy oils from the Lunnan and Tahe oilfields, dominated by C30 sterane and C31 4-methylsterane carboxylic acids, respectively, are significantly different from those of the heavy oils of Well TD2, whose dominating sterane and 4-methylsterane carboxylic acids are C28 sterane and C29 4-methylsterane acids, respectively. The RICO products of the asphaltenes further indicate that the Middle-Upper Ordovician may be the main source rocks for heavy oils from the Lunnan and Tabe oilfields. 相似文献
The near-to-nature approach has been established as best practice for stormwater management. However, pollutant mobility within such systems and its impact on small receiving waters are partly unexplained. The study takes place in an urbanised headwater catchment in south-western Germany with an area of 0.4 km2. Runoff from roofs, roads, parking lots and gardens is collected in wells or trenches and stored in private and public dry detention basins. Accordingly, this study investigates pollutant input to a detention pond, removal efficiency and the associated effects on the receiving water.Grab samples with high temporal resolution of the receiving water (16 flood events with 315 samples and 41 baseflow samples), the three inflows of the detention basin and its outflow (four flood events with 64 samples) were taken. The outflow of the dry pond is recovered in the hydro- and chemographs of the receiving water. Runoff from roads with increased traffic volume caused the highest PAH inputs and runoff from the residential area showed the highest zinc concentrations, which partly infringe European Environmental Quality Standards. Yearly pollutant inputs (DOC, TSS, PAH, nutrients, metals) from the settlement into the tributary are reduced in the detention pond by up to 80%. 相似文献
Thermal impact of typical high‐density residential, industrial, and commercial land uses is a major concern for the health of aquatic life in urban watersheds, especially in smaller, cold, and cool‐water streams. This is the first study of its kind that provides simple easy‐to‐use equations, developed using gene expression programming (GEP) that can guide the assessment and the design of urban stormwater management systems to protect thermally sensitive receiving streams. We developed 3 GEP models using data collected during 3 years (2009–2011) from 4 urban catchments; the first GEP model predicts event mean temperature at the inlet of the pond; the second model predicts the stormwater temperature at the outlet of the pond; and the third model predicts the temperature of the stormwater after flowing through a cooling trench and before discharging to the receiving stream. The new models have high correlation coefficients of 0.90–0.94 and low prediction uncertainty of less than 4% of the median value of the predicted runoff temperatures. Sensitivity analysis shows that climatic factors have the highest influence on the thermal enrichment followed by the catchment characteristics and the key design variables of the stormwater pond and the cooling trench. The general method presented here is easily transferable to other regions of the world (but not necessarily the exact equations developed here); also through sensitivity and parametric analysis, we gained insight on the key factors and their relative importance in modelling thermal enrichment of urban stromwater runoff. 相似文献
Climate factors play critical roles in controlling chemical weathering, while chemically weathered surface material can regulate climate change. To estimate global chemical weathering fluxes and CO2 balance, it is important to identify the characteristics and driving factors of chemical weathering and CO2 consumption on the Tibetan Plateau, especially in glaciated catchments. The analysis of the hydro-geochemical data indicated that silicate weathering in this area was inhibited by low temperatures, while carbonate weathering was promoted by the abundant clastic rocks with fresh surfaces produced by glacial action. Carbonate weathering dominated the riverine solute generation (with a contribution of 58%, 51%, and 43% at the QiangYong Glacier (QYG), the WengGuo Hydrological Station (WGHS), and the lake estuary (LE), respectively). The oxidation of pyrite contributed to 35%, 42%, and 30% of the riverine solutes, while silicate weathering contributed to 5%, 6%, and 26% of the riverine solutes at the QYG, WGHS, and LE, respectively. The alluvial deposit of easily weathering fine silicate minerals, the higher air temperature, plant density, and soil thickness at the downstream LE in comparison to upstream and midstream may lead to longer contact time between pore water and mineral materials, thus enhancing the silicate weathering. Because of the involvement of sulfuric acid produced by the oxidation of pyrite, carbonate weathering in the upstream and midstream did not consume atmospheric CO2, resulting in the high rate of carbonate weathering (73.9 and 75.6 t km−2 yr−1, respectively, in maximum) and potential net release of CO2 (with an upper constraint of 35.6 and 35.2 t km−2 yr−1, respectively) at the QYG and WGHS. The above results indicate the potential of the glaciated area of the Tibetan Plateau with pyrite deposits being a substantial natural carbon source, which deserves further investigation. 相似文献
In order to investigate the response of authigenic minerals to gas hydrate geo-systems, the biogeochemical processes and its induced mineralization were predicted by employing the comprehensive reactive transport modeling approach. Based on the available data extracted from the northern continental slope area of the South China Sea, a 1-D vertical column model was developed. Three cases with different upward methane flux rates and three cases with different mineral compositions, i.e., a total of six cases were designed to investigate the effects of variations in the depth of sulfate methane transition zone (SMTZ) and in the mineral composition on the formation of authigenic minerals. The simulation results indicate that the SMTZ depth influenced by both the upward methane flux rate and the initial composition played an important role in the formation of authigenic minerals. The AOM reaction is intensive at the interface, and the precipitation amount of calcite is large, which is mainly controlled by AOM. When the methane leakage rate is 20 times higher than the base case, aragonite starts to precipitate. During the simulation, oligoclase, k-feldspar, smectite-Na, smectite-Ca, chlorite dissolved. Our study specific to this area as a starting point may provide a quantitative approach for investigating carbonate and pyrite formation in hydrate-bearing sediments accounting for methane oxidation and sulfate reduction. The method presented here and the model built in this study can be used for other sites with similar conditions. In addition, this study may serve as an indication for the potential natural gas hydrate reservoir in depth, and is also significant for marine carbon and sulfur cycle. 相似文献
Metapelitic granulites from the Anosyen domain of southeastern Madagascar are exposed in three intercalated formations: the Amparihy, Bakika and Ihosy formations. Although mineralogically distinct from each other, the rocks from these formations show very similar bulk‐rock compositions when measured on a FeT basis. The preserved mineral assemblages thus do not reflect differences in the ratios of the main rock‐forming oxides (i.e. Al2O3:FeT:MgO), but instead reflect variations in the pre‐metamorphic oxidation state of the protolith rocks. These differences in oxidation state are manifested via differences in iron speciation – either Fe+2 or Fe+3. The relatively reduced rocks of the Amparihy Formation preserve the assemblage bi–sp–sill–g–cd, which contrasts markedly with the mostly garnet and spinel‐absent bi–cd–sill–mt assemblages preserved in the strongly oxidized rocks of the Ihosy Formation. Compositionally intermediate rocks of the Bakika Formation are garnet bearing, but sillimanite‐absent, and contain the assemblage sp–g–cd–mag. Modelling of these rocks in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O system suggests that they evolved along a heating and cooling P–T path with only limited decompression accompanying cooling on the retrograde path. Peak temperatures and pressures of ~880–920 °C and 6–6.5 kbar are inferred for the majority of the Anosyen domain, with slightly lower peak temperatures (~840 °C) estimated in the extreme northwest of the area. The high‐temperature and relatively low‐pressure nature of metamorphism suggests high geothermal gradients existed during orogenesis, which in southern Madagascar is related to the amalgamation of Gondwana (580–520 Ma). Although metamorphic temperatures may have been augmented via thermal advection from the emplacement of the syn‐ to post‐tectonic Ambalavao suite, the high geothermal gradients nevertheless suggest thin and consequently hot lithosphere existed prior to orogenesis. 相似文献